Radio Receiver -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2002X.html).
| 2. REMOVE HEATER CONTROL KNOB |
Remove the control knob.
 |
| 3. REMOVE NO. 2 HEATER CONTROL KNOB |
Remove the 3 control knobs.
 |
| 4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
Remove the screw.
 |
Detach the 6 claws and 4 clips.
- HINT:
- To prevent the clips from falling, pull out the panel horizontally. Hold both sides of the panel in the locations indicated by the arrows in the illustration.
Disconnect the connectors and remove the panel.
| 5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Air Conditioning System) |
Detach the 6 claws and 4 clips.
- HINT:
- To prevent the clips from falling, pull out the panel horizontally. Hold both sides of the panel in the locations indicated by the arrows in the illustration.
 |
Disconnect the connectors and remove the panel.
| 6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET |
Remove the 4 screws.
 |
Disconnect all the connectors and remove the radio receiver assembly with bracket.
| 7. REMOVE NO. 1 RADIO BRACKET |
Remove the 4 screws and No. 1 radio bracket from the radio receiver.
 |
| 8. REMOVE NO. 2 RADIO BRACKET |
Remove the 4 screws and No. 2 radio bracket from the radio receiver.
 |