Front Seat Assembly (For Power Seat) -- Removal |
| 1. REMOVE FRONT SEAT HEADREST ASSEMBLY |
Remove the front seat headrest.
| 2. REMOVE INNER SEAT TRACK BRACKET COVER |
Operate the power seat switch (slide switch) to move the seat to the foremost position.
 |
Using a screwdriver, detach the 2 claws and remove the cover.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE OUTER SEAT TRACK BRACKET COVER |
Using a screwdriver, detach the 2 claws and remove the cover.
- HINT:
- Tape the screwdriver tip before use.
 |
| 4. REMOVE FRONT SEAT ASSEMBLY |
Remove the 2 bolts.
 |
Operate the power seat switch (slide switch) to move the seat to the rearmost position.
Remove the 2 bolts.
 |
Operate the power seat switch (slide switch) and move the seat to the center position, operate the power seat switch (reclining switch) and move the seatback to the upright position, and operate the power seat switch (lifter switch) and move the seat to the uppermost position.
w/ Front Seat Side Airbag:
Disconnect the cable from the negative (-) battery terminal.- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2006X.html).
Disconnect the connector under the seat.
w/ Front Seat Side Airbag:
Disconnect the airbag connector.- NOTICE:
- Be careful not to damage the airbag wire harness or connector.
Remove the seat from the vehicle.
- NOTICE:
- Be careful not to damage the vehicle body.