Parking Brake Cable Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR WHEEL

  3. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

  4. REMOVE CONSOLE BOX ASSEMBLY

  5. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

  6. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

  7. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

Parking Brake Cable -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2006X.html).


2. REMOVE REAR WHEEL


3. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

  1. Release the parking brake lever, and remove the drum.

    HINT:
    If the drum cannot be removed easily, perform the following procedures.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Parking Brake.Parking Brake Cable.Parking Brake Cable Removal

  1. Remove the hole plug (adjust) and insert a screwdriver into the hole on the backing plate, and hold the automatic adjust lever away from the adjuster.

  1. Using another screwdriver, compress the shoe adjuster by turning the adjusting wheel.



4. REMOVE CONSOLE BOX ASSEMBLY

  1. Remove the console box assembly (Toyota Fortuner RM000000SQH00QX.html).



5. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY



Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Parking Brake.Parking Brake Cable.Parking Brake Cable Removal

  1. Disconnect the cable from the parking brake lever (Toyota Fortuner RM000001HKC008X.html).

  1. Remove the 2 bolts and No. 1 heat insulator.

  1. Remove the No. 1 clip and pin.

  1. Disconnect the cable from the No. 3 cable.

  1. Disconnect the cable from the equalizer.

  1. Remove the bolt holding the cable.

  1. Remove the cable from the cable support bracket.



6. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY



Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Parking Brake.Parking Brake Cable.Parking Brake Cable Removal

  1. Disconnect the cable from the parking brake shoe lever RH and backing plate RH.

    1. Disconnect the cable from the lever (Toyota Fortuner RM000001HJX005X.html).

    2. Remove the 2 bolts and disconnect the cable from the backing plate.

  1. Remove the 3 bolts and No. 2 heat insulator.

  1. Disconnect the cable from the equalizer as shown in the illustration.

  1. Remove the 4 bolts and cable as shown in the illustration.



7. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY



Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Parking Brake.Parking Brake Cable.Parking Brake Cable Removal

  1. Disconnect the cable from the parking brake shoe lever LH and backing plate LH.

    1. Disconnect the cable from the lever (Toyota Fortuner RM000001HJX005X.html).

    2. Remove the 2 bolts and disconnect the cable from the backing plate.

  1. Remove the No. 3 clip as shown in the illustration.

  1. Remove the 4 bolts, nut and cable as shown in the illustration.