Front Brake Removal


  1. REMOVE FRONT WHEEL

  2. DRAIN BRAKE FLUID

  3. REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING

  4. REMOVE FRONT DISC BRAKE PAD

  5. REMOVE FRONT ANTI-SQUEAL SHIM KIT

  6. DISCONNECT FRONT NO. 1 WHEEL CYLINDER TUBE LH

  7. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH

Front Brake -- Removal


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE FRONT WHEEL


2. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


3. REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake.Front Brake.Front Brake Removal

  1. Remove the 2 clips. Then remove the 2 pins.

  1. Remove the anti-rattle spring.

    NOTICE:
    The anti-rattle spring can be reused if it has sufficient rebound; no deformation, cracks or wear; and has all rust, dirt and foreign matter cleaned off.


4. REMOVE FRONT DISC BRAKE PAD

  1. Remove the 2 disc brake pads.



5. REMOVE FRONT ANTI-SQUEAL SHIM KIT

  1. Remove the No.1 and No. 2 shims from each pad.



6. DISCONNECT FRONT NO. 1 WHEEL CYLINDER TUBE LH


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Using a union nut wrench, disconnect the tube from the cylinder.



7. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 2 bolts and cylinder.