Rear No. 1 Seat Assembly (For Rh Side) Removal


  1. REMOVE REAR SEAT CUSHION HINGE COVER LH

  2. REMOVE REAR SEAT CUSHION HINGE COVER RH

  3. REMOVE REAR NO. 1 SEAT ASSEMBLY

Rear No. 1 Seat Assembly (For Rh Side) -- Removal



1. REMOVE REAR SEAT CUSHION HINGE COVER LH


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Seat.Rear No. 1 Seat Assembly (For Rh Side).Rear No. 1 Seat Assembly (For Rh Side) Removal

  1. Using a clip remover, remove the clip.

  1. Using a screwdriver, detach the 2 claws and remove the hinge cover.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE REAR SEAT CUSHION HINGE COVER RH
HINT:
Use the same procedures described for the LH side.


3. REMOVE REAR NO. 1 SEAT ASSEMBLY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Seat.Rear No. 1 Seat Assembly (For Rh Side).Rear No. 1 Seat Assembly (For Rh Side) Removal

  1. Fully tilt the seatback forward.

  1. Remove the 2 bolts.

  1. Unlock the seat locks by pulling the reclining remote control lever knob in the direction of the arrow in the illustration. Then fold the seat as shown in the illustration.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Seat.Rear No. 1 Seat Assembly (For Rh Side).Rear No. 1 Seat Assembly (For Rh Side) Removal

  1. Remove the 2 nuts and seat.

    NOTICE:
    Be careful not to damage the vehicle body.