Crankshaft Position Sensor Installation


  1. INSTALL CRANKSHAFT POSITION SENSOR

  2. INSTALL NO. 2 ENGINE UNDER COVER

  3. INSTALL NO. 1 ENGINE UNDER COVER

Crankshaft Position Sensor -- Installation



1. INSTALL CRANKSHAFT POSITION SENSOR

  1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

  1. Install the crankshaft position sensor with the bolt.

    Torque:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}

  1. Attach the 4 clips and connect the crankshaft position sensor connector.

    NOTICE:
    Insert the crankshaft position sensor wire harness into the protrusions of the timing gear cover.


2. INSTALL NO. 2 ENGINE UNDER COVER
Torque:
28 N*m{286 kgf*cm, 21 ft.*lbf}


3. INSTALL NO. 1 ENGINE UNDER COVER
Torque:
28 N*m{286 kgf*cm, 21 ft.*lbf}