Starter (For Bosch Made) Installation


  1. INSTALL STARTER ASSEMBLY

  2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

  3. INSTALL FRONT FENDER SEAL

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter (For Bosch Made) -- Installation



1. INSTALL STARTER ASSEMBLY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.1Kd-Ftv Starting.Starter (For Bosch Made).Starter (For Bosch Made) Installation

  1. Connect the ground cable and install the starter with the 2 bolts.

    HINT:
    Make sure to connect the ground cable with the bolt as shown in the illustration.
    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install the starter wire to terminal 30 with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the starter connector.



2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.1Kd-Ftv Starting.Starter (For Bosch Made).Starter (For Bosch Made) Installation

  1. Install the release cylinder with the 2 bolts.

    Torque:
    12 N*m{120 kgf*cm, 9 ft.*lbf}


3. INSTALL FRONT FENDER SEAL

  1. Install the seal with the 5 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.