Audio And Visual System (For Radio And Display Type) Dtc Check / Clear

  1. START DIAGNOSTIC MODE

  1. FINISH DIAGNOSTIC MODE

  1. FAILURE DIAGNOSIS

  1. SYSTEM CHECK

  1. CHECK DTC (CHECK USING SYSTEM CHECK MODE SCREEN)

  1. DTC CLEAR/RECHECK (CLEAR USING SYSTEM CHECK MODE SCREEN)

Audio And Visual System (For Radio And Display Type) -- Dtc Check / Clear



START DIAGNOSTIC MODE
HINT:
  1. Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.
  2. If the system cannot enter the diagnostic mode, replace the radio and display receiver assembly (Toyota Fortuner RM000003YVK018X.html).

  1. Start the engine.



    2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Audio Visual.Audio And Visual System (For Radio And Display Type).Audio And Visual System (For Radio And Display Type) Dtc Check / Clear

  2. While pressing and holding the "AUDIO" or "MEDIA" switch, operate the light control switch: off → turn on → turn off → turn on → turn off → turn on → turn off.

    Text in Illustration
    *a
    		Example


    3. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  3. Diagnostic mode starts and the "Service Menu" screen is displayed.


FINISH DIAGNOSTIC MODE

  1. There are 2 methods to end diagnostic mode. Use one of them.

    1. Turn the ignition switch off.

    2. Press and hold the "AUDIO" or "MEDIA" switch for 3 seconds.


FAILURE DIAGNOSIS


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Touch the "Failure Diagnosis" button on the "Service Menu" screen.



    2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  2. The "Failure Diagnosis" screen is displayed.


SYSTEM CHECK


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Touch the "System Check" button on the "Failure Diagnosis" screen.



    2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  2. The "System Check Mode" screen is displayed.


CHECK DTC (CHECK USING SYSTEM CHECK MODE SCREEN)

  1. Read the system check result.



    2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Audio Visual.Audio And Visual System (For Radio And Display Type).Audio And Visual System (For Radio And Display Type) Dtc Check / Clear

  2. If the check result is "DETAIL", touch the displayed check result.

    Text in Illustration
    *a
    		Check Result


    3. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Audio Visual.Audio And Visual System (For Radio And Display Type).Audio And Visual System (For Radio And Display Type) Dtc Check / Clear

  3. View the results on the "Unit Check Mode" screen and record them.

    Text in Illustration
    *a
    		Diagnostic Code

  4. When proceeding to view the results of another device, touch the "Back" button to return to the "System Check Mode" screen.

    HINT:
    To check the other items, repeat this procedure from the first step.

DTC CLEAR/RECHECK (CLEAR USING SYSTEM CHECK MODE SCREEN)


  1. Clear DTC



      Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

    1. Touch the "Code CLR" button for 3 seconds.

    2. Confirm that the check results are cleared.

      HINT:
      1. To clear the DTC for a specific device, clear the DTC using the "Unit Check Mode" screen.
      2. When clearing a DTC using the "Unit Check Mode" screen, touch the "Code CLR" button for 3 seconds.


  2. Recheck



      Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

    1. Touch the "Recheck" button.



      2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

    2. Confirm that all check results are "OK" when the check results are displayed. If a result other than "OK" is displayed, troubleshoot again.

      HINT:
      When a DTC is cleared using the "Unit Check Mode" screen, touch the "Back" button to return to the "System Check Mode" screen and perform this operation.