Front Passenger Airbag Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

  3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

Front Passenger Airbag Assembly -- Removal


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Toyota Fortuner RM000000YVR005X.html).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Supplemental Restraint System.Front Passenger Airbag Assembly.Front Passenger Airbag Assembly Removal

  1. Open the glove compartment door.

  1. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, open the door to release it from the 2 stoppers.

  1. Open the door until it is horizontal.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Supplemental Restraint System.Front Passenger Airbag Assembly.Front Passenger Airbag Assembly Removal

  1. Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.



3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Disconnect the connector from the airbag.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 2 bolts.

  1. Detach the clamp from the bracket.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Detach the 12 claws and remove the airbag.