Dtc P0560/96 System Voltage


DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK TCM (BATTERY, GROUND)

DTC P0560/96 System Voltage


DESCRIPTION

The battery supplies power to the TCM even when the ignition switch is off. This power allows the TCM to store data such as DTC history, freeze frame data and fuel trim values. If the battery voltage falls below a minimum level, the TCM data is cleared and the TCM determines that there is a malfunction in the power supply circuit. The next time the engine is started, the TCM will illuminate the MIL and store the DTC.

DTC Code
DTC Detection Condition
Trouble Area
P0560/96
Open in the TCM back-up power source circuit (1 trip detection logic).
  1. Open in back-up power source circuit
  2. TCM
HINT:
If DTC P0560/96 is stored, the TCM does not store other DTCs.

WIRING DIAGRAM


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A340F Automatic Transmission.Automatic Transmission System. Dtc P0560/96 System Voltage


INSPECTION PROCEDURE

1.CHECK TCM (BATTERY, GROUND)


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A340F Automatic Transmission.Automatic Transmission System. Dtc P0560/96 System Voltage

  1. Disconnect the T37 and T19 TCM connectors.

  1. Measure the voltage of the wire harness side connectors.

    Standard Voltage:
    Tester Connection
    		Condition
    		Specified Condition
    T37-5 (BATT) - T19-1 (E1)
    		Always
    		11 to 14 V

  1. Measure the resistance of the wire harness side connector.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    T19-1 (E1) - Body ground
    		Always
    		Below 1 Ω


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR (TCM - BATTERY, GROUND)
OK

REPLACE TCM