Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER
WASHER NOZZLE (for Front Side) - ON-VEHICLE INSPECTION
- HINT:
Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
1. INSPECT WASHER NOZZLE SUB-ASSEMBLY |
With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.
- Standard:
- Washer fluid hits the windshield in the area shown in the illustration.
If the result is not as specified, replace the washer nozzle.
- Standard Measurement:
Area Specified Condition A 253.2 mm (9.97 in.) B 41.4 mm (1.63 in.) C 192.9 mm (7.59 in.) D 444.0 mm (17.48 in.)
LEXUS IS250, IS220d / GSE20 ALE20