Injector driver 2AD-FHV

Injector driver 2AD-FHV
Components

Injector driver 2AD-FHV Components

Injector driver 2AD-FHV
Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE DIFFERENTIAL PRESSURE SENSOR

Injector driver 2AD-FHV. Disconnect the 4 connectors and clamp.

  1. Disconnect the 4 connectors and clamp.

  2. Remove the nut and differential pressure sensor.

3. REMOVE INJECTOR DRIVER

Injector driver 2AD-FHV. Remove the 2 nuts and injector driver.

  1. Remove the 2 nuts and injector driver.

Injector driver 2AD-FHV
Installation

1. INSTALL INJECTOR DRIVER

Injector driver 2AD-FHV. Install the injector driver with the 2 nuts.

  1. Install the injector driver with the 2 nuts.

    Torque: 

    6.5 N*m{ 66 kgf*cm , 58 lbsf.in }

2. INSTALL DIFFERENTIAL PRESSURE SENSOR

Injector driver 2AD-FHV

  1. Install the differential pressure sensor with the nut.

    Torque: 

    6.5 N*m{ 66 kgf*cm , 58 lbsf.in }

  2. Connect the 4 connectors and clamp.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
2AD-FHV