Ecm - Removal(2009/01 - 2010/08)

Brand:

Toyota

Model Name:

Camry ACV40 GSV40

Manual:

Repair Manual

Section:

2Gr-Fe Engine Control System

Title:

Ecm

  1. Disconnect cable to negative battery terminal

  2. Remove windshield wiper arm and blade assembly lh

  3. Remove windshield wiper arm and blade assembly rh

  4. Remove front fender to cowl side seal lh

  5. Remove front fender to cowl side seal rh

  6. Remove cowl top ventilator louver sub-assembly

  7. Remove windshield wiper motor and link

  8. Remove cowl top outer panel sub-assembly

  9. Remove ecm



​

1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL


2. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH
  1. Remove the nut and the front wiper arm and blade assembly LH. Camry
  2. Remove the nut and the front wiper arm and blade assembly LH.



3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
  1. Remove the nut and the front wiper arm and blade assembly RH. Camry
  2. Remove the nut and the front wiper arm and blade assembly RH.



4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
  1. Disengage the claw and remove the front fender to cowl side seal LH. Camry
  2. Disengage the claw and remove the front fender to cowl side seal LH.



5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
  1. Disengage the claw and remove the front fender to cowl side seal RH. Camry
  2. Disengage the claw and remove the front fender to cowl side seal RH.



6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
  1. Remove the 2 clips. Camry
  2. Remove the 2 clips.

  1. Disengage the 4 claws and remove the cowl top ventilator louver sub-assembly.



7. REMOVE WINDSHIELD WIPER MOTOR AND LINK
  1. Disconnect the connector. Camry
  2. Disconnect the connector.

  1. Remove the 4 bolts and the windshield wiper motor and link assembly. Camry
  2. Remove the 4 bolts and the windshield wiper motor and link assembly.



8. REMOVE COWL TOP OUTER PANEL SUB-ASSEMBLY
  1. Remove the 4 bolts, 4 nuts and cowl top panel outer sub-assembly. Camry
  2. Remove the 4 bolts, 4 nuts and cowl top panel outer sub-assembly.



9. REMOVE ECM
  1. Remove the 3 nuts. Camry
  2. Remove the 3 nuts.

  1. Disconnect the 2 connectors and remove the ECM. Camry
  2. Disconnect the 2 connectors and remove the ECM.

  1. Remove the 4 screws and 2 ECM brackets. Camry
  2. Remove the 4 screws and 2 ECM brackets.