Proportioning Valve (For Hatchback) Removal
REMOVE CENTER COWL TOP VENTILATOR LOUVER
DRAIN BRAKE FLUID
REMOVE BATTERY
REMOVE BATTERY TRAY
REMOVE BATTERY CARRIER
REMOVE PROPORTIONING VALVE
Proportioning Valve (For Hatchback) -- Removal |
1. REMOVE CENTER COWL TOP VENTILATOR LOUVER |
Disengage the 2 clips and slide the hood to cowl top seal as shown in the illustration.
Disengage the 2 claws and separate the washer hose joint.
- NOTICE:
- To prevent washer fluid from contaminating the brake master cylinder reservoir, do not separate the washer hose.
Disengage the 2 claws and 6 guides remove the cowl top ventilator louver center.
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
Disconnect the cable from the battery terminal.
Loosen the 2 nuts and remove the battery clamp.
Remove the battery.
5. REMOVE BATTERY CARRIER |
Disengage the 6 clamps and disconnect the wire harness from the battery carrier.
Remove the 5 bolts and the battery carrier.
6. REMOVE PROPORTIONING VALVE |
Using a union nut wrench 10 mm, separate the 6 brake tubes from the proportioning valve and the brake tube way.
Remove the 2 bolts and the proportioning valve bracket.
Using a union nut wrench 10 mm, remove the 3 brake tubes from the proportioning valve and the brake tube way.
Remove the 2 nuts and the proportioning valve from the proportioning valve bracket.