Rear Brake (For Hatchback Drum Type) Disassembly

Using SST, separate the shoe return spring from the front brake shoe.

SST

09921-00011

NOTICE:

Do not damage the wheel cylinder boot.

Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.

SST

09718-00011

Remove the tension spring.

Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.

Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.

SST

09718-00011

Using needle-nose pliers, separate the parking brake cable.

Remove the automatic adjust lever tension spring and the automatic adjust lever.

Using a screwdriver, remove the C-washer and parking brake shoe lever.

Using a union nut wrench 10 mm, separate the brake tube from the rear wheel brake cylinder.

HINT:

Use a container to catch the brake fluid.

Remove the bolt and rear wheel brake cylinder.

Remove the 2 wheel cylinder boots from the wheel brake cylinder.

Remove the 2 pistons.

Remove the wheel cylinder cup from each piston.

Remove the compression spring.