Stop Light Switch (For Sedan) Installation

Vehicle Exterior. Yaris. Ncp93, 131
Lighting (Ext). Yaris. Ncp93, 131

  1. INSTALL STOP LIGHT SWITCH

  2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Stop Light Switch (For Sedan) -- Installation



1. INSTALL STOP LIGHT SWITCH


    Yaris. Ncp93, 131.Lighting (Ext).Lighting System (For Sedan).Stop Light Switch (For Sedan) Installation

  1. Install the stop light switch into the adjuster until it slightly touches the brake pedal.

    NOTICE:
    Do not depress the brake pedal.



      Yaris. Ncp93, 131.Lighting (Ext).Lighting System (For Sedan).Stop Light Switch (For Sedan) Installation

    1. Make a quarter turn clockwise to install the stop light switch.

      NOTICE:
      Do not depress the brake pedal.
      HINT:
      The turning torque for installing the stop light switch is as below.
      Torque:
      1.5 N*m{15 kgf*cm, 13 in.*lbf}or less

  1. Check the stop light switch clearance.

    Stop light switch clearance:
    0.5 to 2.6 mm (0.020 to 0.102 in.)


    Yaris. Ncp93, 131

  1. Connect the stop light switch connector to the stop light switch.



2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH


    Yaris. Ncp93, 131

  1. Engage the 3 claws and install the instrument panel under cover.

  1. Tighten the 2 screws.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N*m{55 kgf*cm, 48 in.*lbf}