Headlight Dimmer Switch (For Sedan) Inspection

Check the resistance of the light control switch.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   10 - 11 - 12 - 13	OFF	10 kΩ or higher
   10 - 13	TAIL	Below 1 Ω
   10 - 13	HEAD	Below 1 Ω
   11 - 12	HEAD	Below 1 Ω

   If the result is not as specified, replace the headlight dimmer switch.
   

Check the resistance of the headlight dimmer switch.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   9 - 11	FLASH	Below 1 Ω
   8 - 11	LOW BEAM	Below 1 Ω
   9 - 11	HI BEAM	Below 1 Ω

   If the result is not as specified, replace the headlight dimmer switch.
   

Check the resistance of the turn signal switch.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   6 - 7	Right turn	Below 1 Ω
   5 - 6 - 7	Neutral	10 kΩ or higher
   5 - 7	Left turn	Below 1 Ω

   If the result is not as specified, replace the headlight dimmer switch.
   

w/ Front fog light:
Check the resistance of the front fog light switch.

1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   3 - 4	OFF	10 kΩ or higher
   3 - 4	Front fog light switch ON	Below 1 Ω

   If the result is not as specified, replace the headlight dimmer switch.