Throttle Body (For Sedan) Removal
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
DRAIN ENGINE COOLANT
REMOVE CYLINDER HEAD COVER NO. 2
REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE NO. 1
DISCONNECT WATER BY-PASS HOSE
DISCONNECT WATER BY-PASS HOSE NO. 2
REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY
Throttle Body (For Sedan) -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- To avoid the danger of being burned, do not remove the radiator cap sub-assembly while the engine and radiator assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.
Loosen the radiator drain cock plug.
Remove the radiator cap sub-assembly.
Loosen the cylinder block drain cock plug, then drain the coolant.
*1
| Water Filler Cap Sub-assembly
| *2
| Radiator Drain Cock Plug
|
*3
| Cylinder Block Drain Cock Plug
| -
| -
|
| 3. REMOVE CYLINDER HEAD COVER NO. 2 |
Remove the 4 nuts and cylinder head cover No. 2.
| 4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE NO. 1 |
Disconnect fuel vapor feed hose No. 1 and fuel vapor feed hose No. 2 from the vacuum switching valve assembly.
Disconnect the vacuum switching valve assembly connector and wire harness clamp.
Disconnect ventilation hose No. 2.
Disconnect the wire harness clamp and mass air flow meter connector.
Loosen the hose clamp, unlock the air cleaner assembly clamp and remove air cleaner cap sub-assembly with air cleaner hose No. 1.
| 5. DISCONNECT WATER BY-PASS HOSE |
Disconnect the water by-pass hose.
| 6. DISCONNECT WATER BY-PASS HOSE NO. 2 |
Disconnect water by-pass hose No. 2.
| 7. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY |
Disconnect the throttle with motor body assembly connector.
Remove the nut and remove the wire harness with bracket.
Remove the 2 nuts and remove the water filler sub-assembly with hose.
Remove the bolt and 3 nuts and remove the throttle with motor body assembly.
Remove the gasket from the intake manifold.
