Engine Hybrid System. Yaris. Ncp93, 131
1Nz-Fe Engine Control. Yaris. Ncp93, 131
Ecm (For Hatchback) -- Removal |
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK |
2. REMOVE FRONT NO. 1 VENTILATOR SEAL |
![]() |
Disengage the clamp and remove the front No. 1 ventilator seal.
3. REMOVE FRONT AIR SHUTTER SEAL RH |
- HINT:
- Use the same procedure as for the No. 1 ventilator seal.
4. REMOVE INNER COWL TOP TO COWL BRACE |
![]() |
Remove the 2 bolts and the inner cowl top to cowl brace.
5. REMOVE OUTER COWL TOP PANEL |
![]() |
Disengage the 2 clamps and separate the wire harness.
Remove the 8 bolts and the outer cowl top panel.
6. REMOVE ECM |
Pull up the lever to loosen the lock and disconnect the 2 connectors from the ECM.
- NOTICE:
- If there are is any foreign matter such as mud or water on a connector, clean the connector.
![]() |
Remove the bolt, nut and the ECM.
![]() |
7. REMOVE NO. 1 ECM BRACKET |
Remove the 2 screws and No. 1 ECM bracket.
![]() |
8. REMOVE NO. 2 ECM BRACKET |
Remove the 2 screws and No. 2 ECM bracket.
![]() |