Power Window Control System (For Sedan) Front Passenger Side Power Window Does Not Operate With Front Passenger Side Power Window Switch
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE) (POWER SOURCE)
INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE)
CHECK HARNESS AND CONNECTOR (SWITCH (PASSENGER SIDE) - MOTOR (PASSENGER SIDE))
INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (PASSENGER SIDE)
CHECK HARNESS AND CONNECTOR (MASTER SWITCH - SWITCH (PASSENGER SIDE))
INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (FRONT PASSENGER SWITCH)
POWER WINDOW CONTROL SYSTEM (for Sedan) - Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch |
DESCRIPTION
If the passenger side manual UP / DOWN function does not operate, a malfunction may exist in the power window regulator motor, power window regulator switch, power window regulator master switch or wire harness.
WIRING DIAGRAM
INSPECTION PROCEDURE
1.CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE) (POWER SOURCE) |
Disconnect the F1 power window regulator switch assembly connector.
Measure the voltage of the wire harness side connector.
- Standard voltage:
Tester Connection
| Condition
| Specified Condition
|
F1-3 - Body ground
| Ignition switch ON
| 11 to 14 V
|
Reconnect the F1 power window regulator switch assembly connector.
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
2.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE) |
Remove the power window regulator switch assembly.
Measure the resistance of the switch when the switch is operated.
- Standard resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
3 - 4 2 - 1
| UP
| Below 1 Ω
|
5 - 4 2 - 1
| OFF
| Below 1 Ω
|
5 - 4 3 - 1
| DOWN
| Below 1 Ω
|
Reinstall the power window regulator switch assembly.
3.CHECK HARNESS AND CONNECTOR (SWITCH (PASSENGER SIDE) - MOTOR (PASSENGER SIDE)) |
Disconnect the F1 power window regulator switch assembly connector.
Disconnect the F4 power window regulator motor assembly connector.
Measure the resistance of the wire harness side connectors.
- Standard resistance:
Tester Connection
| Specified Condition
|
F1-1 - F4-1
| Below 1 Ω
|
F1-4 - F4-2
| Below 1 Ω
|
F1-1 or F4-1 - Body ground
| 10 kΩ or higher
|
F1-4 or F4-2 - Body ground
| 10 kΩ or higher
|
Reconnect the F1 power window regulator switch assembly connector.
Reconnect the F4 power window regulator motor assembly connector.
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
4.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (PASSENGER SIDE) |
Remove the power window regulator motor assembly.
Apply battery voltage to connector terminals 1 and 2.
- NOTICE:
- Do not apply battery voltage to any terminals except terminals 1 and 2.
Check that the motor gear rotates smoothly as follows.
- OK:
Measurement Condition
| Specified Condition
|
Battery positive (+) → 1 Battery negative (-) → 2
| Motor gear rotates clockwise
|
Battery positive (+) → 2 Battery negative (-) → 1
| Motor gear rotates counterclockwise
|
Reinstall the power window regulator motor assembly.
5.CHECK HARNESS AND CONNECTOR (MASTER SWITCH - SWITCH (PASSENGER SIDE)) |
Disconnect the G1 power window regulator master switch assembly connector.
Disconnect the F1 power window regulator switch assembly connector.
Measure the resistance of the wire harness side connectors.
- Standard resistance:
Tester Connection
| Specified Condition
|
G1-16 (U) - F1-5
| Below 1 Ω
|
G1-15 (D) - F1-2
| Below 1 Ω
|
G1-16 (U) or F1-5 - Body ground
| 10 kΩ or higher
|
G1-15 (D) or F1-2 - Body ground
| 10 kΩ or higher
|
Reconnect the G1 power window regulator master switch assembly connector.
Reconnect the F1 power window regulator switch assembly connector.
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
6.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (FRONT PASSENGER SWITCH) |
Remove the power window regulator master switch.
Measure the resistance of the switch when the switch is operated.
- Standard resistance:
Window Lock Switch Condition
| Power Window Switch Condition
| Tester Connection
| Specified Condition
|
OFF
| UP
| 1 (E) - 15 (D) 6 (B) - 16 (U)
| Below 1 Ω
|
OFF
| OFF
| 1 (E) - 16 (U) 1 (E) - 15 (D)
| Below 1 Ω
|
OFF
| DOWN
| 1 (E) - 16 (U) 6 (B) - 15 (D)
| Below 1 Ω
|
ON
| UP
| 1 (E) - 15 (D)
| 10 kΩ or higher
|
6 (B) - 16 (U)
| Below 1 Ω
|
ON
| OFF
| 15 (D) - 16 (U)
| Below 1 Ω
|
ON
| DOWN
| 1 (E) - 16 (U)
| 10 kΩ or higher
|
6 (B) - 15 (D)
| Below 1 Ω
|
Reinstall the power window regulator master switch.