Anti-Lock Brake System (For Hatchback) Brake Warning Light Does Not Come On
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
CHECK BRAKE WARNING LIGHT
READ VALUE USING TECHSTREAM (BRAKE WARNING LIGHT)
ANTI-LOCK BRAKE SYSTEM (for Hatchback) - Brake Warning Light does not Come ON |
DESCRIPTION
The skid control ECU (brake actuator assembly) is connected to the combination meter via CAN communication.
WIRING DIAGRAM
Refer to Brake Warning Light Remains ON (YARIS_NCP93 RM000000YHG0CCX_02.html).
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
1.CHECK CAN COMMUNICATION SYSTEM |
Check if CAN communication system DTCs are output (YARIS_NCP93 RM000001RSW02LX.html).
ResultResult
| Proceed to
|
DTC is not output
| A
|
DTC is output
| B
|
2.CHECK BRAKE WARNING LIGHT |
Disconnect the skid control ECU connector.
Turn the ignition switch to ON.
Check that the brake warning light comes on.
Reconnect the skid control ECU connector.
3.READ VALUE USING TECHSTREAM (BRAKE WARNING LIGHT) |
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Chassis / ABS/VSC/TRAC / Data List.
According to the display on the Techstream, read the Data List.
ABS/VSC/TRACTester Display
| Measurement Item/Range
| Normal Condition
| Diagnostic Note
|
Brake Warning Light
| Brake warning light / OFF or ON
| OFF
| -
|
When performing the Brake Warning Light Active Test, check Brake Warning Light in the Data List.
ABS/VSC/TRACTester Display
| Test Part
| Control Range
| Diagnostic Note
|
Brake Warning Light
| Brake warning light
| Warning light ON/OFF
| Observe the combination meter.
|
ResultResult
| Proceed to
|
Data List Display
| Data List Display when Performing Active Test ON/OFF Operation
|
ON
| Changes between ON and OFF
| A
|
Does not change between ON and OFF
| B
|
OFF
| Changes between ON and OFF
| A
|
Does not change between ON and OFF
| B
|
Connect the Techstream to the DLC3.