Anti-Lock Brake System (For Hatchback) Abs Warning Light Does Not Come On
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
CHECK ABS WARNING LIGHT
READ VALUE USING TECHSTREAM (ABS WARNING LIGHT)
ANTI-LOCK BRAKE SYSTEM (for Hatchback) - ABS Warning Light does not Come ON |
DESCRIPTION
The skid control ECU (brake actuator assembly) is connected to the combination meter via CAN communication.
WIRING DIAGRAM
Refer to ABS Warning Light Remains ON (YARIS_NCP93 RM000000XIH0CAX_02.html).
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
1.CHECK CAN COMMUNICATION SYSTEM |
Check if CAN communication system DTCs are output (YARIS_NCP93 RM000001RSW02LX.html).
ResultResult
| Proceed to
|
DTC is not output
| A
|
DTC is output
| B
|
2.CHECK ABS WARNING LIGHT |
Disconnect the skid control ECU connector.
Turn the ignition switch to ON.
Check that the ABS warning light comes on.
ResultResult
| Proceed to
|
NG
| A
|
OK
| B
|
Reconnect the skid control ECU connector.
3.READ VALUE USING TECHSTREAM (ABS WARNING LIGHT) |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Chassis / ABS/VSC/TRAC / Data List.
According to the display on the Techstream, read the Data List.
ABS/VSC/TRACTester Display
| Measurement Item/Range
| Normal Condition
| Diagnostic Note
|
ABS Warning Light
| ABS warning light / OFF or ON
| OFF
| -
|
When performing the ABS Warning Light Active Test, check ABS Warning Light in the Data List.
ABS/VSC/TRACTester Display
| Test Part
| Control Range
| Diagnostic Note
|
ABS Warning Light
| ABS warning light
| Warning light ON/OFF
| Observe the combination meter.
|
ResultResult
| Proceed to
|
Data List Display
| Data List Display when Performing Active Test ON/OFF Operation
|
ON
| Changes between ON and OFF
| A
|
Does not change between ON and OFF
| B
|
OFF
| Changes between ON and OFF
| A
|
Does not change between ON and OFF
| B
|