Anti-Lock Brake System (For Sedan) Freeze Frame Data

Brake. Yaris. Ncp93, 131
Brake Control Dynamic Control Systems. Yaris. Ncp93, 131

  1. FREEZE FRAME DATA

  1. CHECK FREEZE FRAME DATA

  1. CLEAR FREEZE FRAME DATA

Anti-Lock Brake System (For Sedan) -- Freeze Frame Data



FREEZE FRAME DATA

  1. Whenever a DTC is detected, the skid control ECU stores the current vehicle (sensor) state as Freeze Frame Data.

  2. The skid control ECU stores the number of times (maximum: 31) the ignition switch has been turned from OFF to ON since the last time the ABS was activated.

    HINT:
    1. However, if the vehicle is stopped or at a low speed (7 km/h (4.3 mph) or less), or if a DTC is detected, the skid control ECU will stop counting the number.
    2. Freeze Frame Data at the time the ABS operates:
      The skid control ECU stores and updates data whenever the ABS system operates.
      When the ECU stores data at the time a DTC is detected, the data stored during ABS operation is cleared.
    3. Freeze Frame Data at the time a DTC is detected:
      When the skid control ECU stores data at the time a DTC is detected, no updates will be performed until the data is cleared.

CHECK FREEZE FRAME DATA

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Check the freeze frame data by following the prompts on the Techstream display.

    ABS/VSC/TRAC
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Elapsed Time after Freeze Trigger
    		Elapsed time after freeze trigger/Min.: 0 msec, Max.: 500 msec
    		-
    		-
    Number of IG ON
    		Number of operations of ignition switch being turned to ON after storing Freeze Frame Data/0 to 31
    		-
    		-
    Stop Light SW
    		Stop light switch/ON or OFF
    		ON: Brake pedal depressed
    OFF: Brake pedal released
    		-
    Parking Brake SW
    		Parking brake switch/ON or OFF
    		ON: Parking brake applied
    OFF: Parking brake released
    		-
    Operated System
    		Operated system status/ABS, Fail, Sys, Non
    		-
    		ABS activated: ABS
    Fail safe mode activated: Fail
    System prohibit activated: Sys
    No operation activated: Non
    FR Wheel Speed
    		FR wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    		Vehicle stopped:
    0 km/h
    		When driving at constant speed:
    No large fluctuations
    FL Wheel Speed
    		FL wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    		Vehicle stopped:
    0 km/h
    		When driving at constant speed:
    No large fluctuations
    RR Wheel Speed
    		RR wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    		Vehicle stopped:
    0 km/h
    		When driving at constant speed:
    No large fluctuations
    RL Wheel Speed
    		RL wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    		Vehicle stopped:
    0 km/h
    		When driving at constant speed:
    No large fluctuations
    Vehicle Speed
    		Maximum wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    		Actual vehicle speed
    		Speed indicated on speedometer
    Vehicle Speed Grade
    		Vehicle speed grade/Min.: -25.10 m/s2, Max.: 24.90 m/s2
    		Vehicle stopped: 0 m/s2
    		During driving: Changes in proportion with vehicle acceleration/deceleration


CLEAR FREEZE FRAME DATA
NOTICE:
Clearing the DTC will also clear the Freeze Frame Data.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Clear the DTC and Freeze Frame Data (YARIS_NCP93 RM000000XHV0BPX.html).