Vehicle Stability Control System (For Hatchback With Built-In Type Yaw Rate Sensor) Dtc Check / Clear

Brake. Yaris. Ncp93, 131
Brake Control Dynamic Control Systems. Yaris. Ncp93, 131

  1. DTC CHECK/CLEAR (When Using Techstream)

  1. DTC CHECK/CLEAR (When not Using Techstream)

  1. END OF DTC CHECK/CLEAR

Vehicle Stability Control System (For Hatchback With Built-In Type Yaw Rate Sensor) -- Dtc Check / Clear



DTC CHECK/CLEAR (When Using Techstream)

  1. Check the DTC.

    1. Turn the ignition switch off.

    2. Connect the Techstream to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the Techstream on.

    5. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.

    6. Check the details of the DTCs (YARIS_NCP93 RM000000XHU08YX.html).

      HINT:
      Refer to the Techstream operator's manual for further details.

  2. Clear the DTC.

    1. Turn the ignition switch off.

    2. Connect the Techstream to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the Techstream on.

    5. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.

    6. Clear the DTCs by following the prompts on the Techstream.

      HINT:
      Refer to the Techstream operator's manual for further details.

DTC CHECK/CLEAR (When not Using Techstream)


    Yaris. Ncp93, 131.Brake Control Dynamic Control Systems.Anti-Lock Brake System (For Sedan).Vehicle Stability Control System (For Hatchback With Built-In Type Yaw Rate Sensor) Dtc Check / Clear

  1. Check the DTC.

    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch to ON.

    3. Observe the blinking pattern of the ABS warning and Slip indicator lights in order to identify the DTC.

      HINT:
      If no code appears, inspect the TC and CG terminal circuit, and ABS warning and Slip indicator light circuits.
      Trouble Area
      		See procedure
      TC and CG terminal circuit
      		YARIS_NCP93 RM000000XIU0ERX.html
      ABS warning light circuit (Remains on)
      		YARIS_NCP93 RM000000XIH0CBX.html
      ABS warning light circuit (Does not come on)
      		YARIS_NCP93 RM000000XIQ0C8X.html
      Slip indicator light circuit (Remains on)
      		YARIS_NCP93 RM000000YHI091X.html
      Slip indicator light circuit (Does not come on)
      		YARIS_NCP93 RM000000YHJ090X.html
      Text in Illustration
      *a
      		Front view of DLC3
      HINT:
      1. When the system is operating correctly, each light will blink continuously in a pattern of 0.25 seconds on, and then 0.25 seconds off.
      2. When one DTC is output, each light will output the same code at 4 second intervals (for example, code 21 would be output as 2 flashes, a 1.5 second pause, and then 1 flash).
      3. When 2 or more DTCs are output, each light will output a different code at 2.5 second intervals, and when all codes have been output, there will be a 4 second pause and the sequence will repeat.
      4. When multiple codes are stored, they are output in order starting with the lowest DTC number

    4. Check the details of the DTCs.

      ABS DTC
      Warning Light Display
      		Tester Display
      11
      		C146E
      12
      		C146F
      13
      		C146C
      14
      		C146D
      21
      		C1468
      22
      		C1469
      23
      		C146A
      24
      		C146B
      25
      		C1225
      31
      		C1401
      C1405
      32
      		C1402
      C1406
      33
      		C1403
      C1407
      34
      		C1404
      C1408
      35
      		C1413
      36
      		C1414
      38
      		C1415
      39
      		C1416
      41
      		C1241
      C1417
      43
      		C1243
      44
      		C1419
      C1442
      45
      		C1245
      46
      		C1421
      C1422
      C1423
      C1424
      49
      		C1425
      51
      		C1427
      C1428
      59
      		C1203
      91
      		C1361
      94
      		U0073
      95
      		U0124
      97
      		C1381
      A2
      		U0142

      VSC DTC
      Indicator Light Display
      		Tester Display
      31
      		C1432
      C1433
      C1434
      32
      		C1232
      34
      		C1435
      C1436
      C1443
      36
      		C1210
      39
      		C1336
      43*1
      		-
      53
      		C1203
      63
      		U0126
      65
      		C1437
      U0100
      66
      		C1290
      C1439
      C1445
      98
      		C1440
      *1: This DTC is output when the VSC system detects a malfunction in the ABS.

    5. After completing the check, disconnect terminals TC and CG of the DLC3 to turn off the display.

      HINT:
      If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.


  2. Clear the DTC.



      Yaris. Ncp93, 131.Brake Control Dynamic Control Systems.Anti-Lock Brake System (For Sedan).Vehicle Stability Control System (For Hatchback With Built-In Type Yaw Rate Sensor) Dtc Check / Clear

    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch to ON.

      Text in Illustration
      *a
      		Front view of DLC3

    3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.

    4. Check that the warning light indicates a normal system code.

    5. Remove SST from the terminals of the DLC3.

      HINT:
      Clearing the DTCs cannot be performed by disconnecting the battery terminal or the ECU-IG fuse.

END OF DTC CHECK/CLEAR

  1. Turn the ignition switch to ON.

  2. Check that the ABS warning and Slip indicator lights go off within approximately 3 seconds after turning the ignition switch to ON.