Center Airbag Sensor Assembly (For Hatchback) Removal

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE REAR CONSOLE BOX ASSEMBLY

  4. REMOVE AIRBAG SENSOR ASSEMBLY

Center Airbag Sensor Assembly (For Hatchback) -- Removal


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000XFD0E4X.html).


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (YARIS_NCP93 RM00000482M008X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


3. REMOVE REAR CONSOLE BOX ASSEMBLY
(YARIS_NCP93 RM000003726005X.html)


4. REMOVE AIRBAG SENSOR ASSEMBLY

  1. Check that the ignition switch is off.

  1. Check that the cable is disconnected from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Center Airbag Sensor Assembly (For Hatchback) Removal

  1. Pull the lever down and disconnect the connector holder.

    Text Illustration
    *1
    		Lever
    NOTICE:
    When disconnecting the airbag connector, take care not to damage the airbag wire harness.


    Yaris. Ncp93, 131

  1. Remove the 3 bolts and the airbag sensor assembly.