Spiral Cable (For Hatchback) Inspection

Vehicle Interior. Yaris. Ncp93, 131

  1. INSPECT SPIRAL CABLE SUB-ASSEMBLY

Spiral Cable (For Hatchback) -- Inspection



1. INSPECT SPIRAL CABLE SUB-ASSEMBLY
NOTICE:
  1. Do not remove the steering sensor from the spiral cable sub-assembly (w/ VSC).
  2. If there is a malfunction in the steering sensor, replace the spiral cable sub-assembly with steering sensor (w/ VSC).
  1. If there are any defects as mentioned below, replace the spiral cable sub-assembly with a new one:

    1. Scratches, cracks, dents or chips on the connector or the spiral cable sub-assembly.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Spiral Cable (For Hatchback)  Inspection
  1. Inspect the spiral cable sub-assembly.

    Text in Illustration
    *a
    Component without harness connected
    (Spiral Cable Sub-assembly)

    1. Measure the resistance according to the value(s) in the table below.

      NOTICE:
      To avoid breaking the spiral cable sub-assembly, do not turn the spiral cable sub-assembly more than necessary.
      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - C8
      (HO)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      A-8 - C-4
      (EAU)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      A-9 - C-5
      (AU2)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      A-10 - C-6
      (AU1)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      B-3 - C-1
      (CCS)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      B-4 - C-2
      (ECC)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      D-1 - E-2
      (D+)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      D-2 - E-1
      (D-)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      D-3 - F-1
      (D2+)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      D-4 - F-2
      (D2-)
      Center
      Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      If the value is not within the specified range, replace the spiral cable sub-assembly.