Dtc C1511/11 Torque Sensor 1 Malfunction
Steering. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK CONNECTOR CONNECTION CONDITION (TORQUE SENSOR - POWER STEERING ECU)
CHECK POWER STEERING ECU
INSPECT TORQUE SENSOR
DTC C1511/11 Torque Sensor 1 Malfunction |
DTC C1512/11 Torque Sensor 2 Malfunction |
DTC C1513/11 Torque Sensor Deviation Excessive |
DTC C1514/11 Torque Sensor Power Supply Voltage Malfunction |
DESCRIPTION
The torque sensor converts the rotation torque input from the steering wheel into electric signals and sends them to the power steering ECU.DTC No.
| DTC Detection Condition
| Trouble Area
|
C1511/11
| Torque sensor malfunction
| - Torque sensor (built into steering column assembly)
- Power steering ECU
- Connector
|
C1512/11
|
C1513/11
|
C1514/11
|
WIRING DIAGRAM
INSPECTION PROCEDURE
1.CHECK CONNECTOR CONNECTION CONDITION (TORQUE SENSOR - POWER STEERING ECU) |
Check the installation condition of the torque sensor connector.
- OK:
- Torque sensor connector is securely connected to the power steering ECU.
| CONNECT CONNECTOR SECURELY |
|
|
2.CHECK POWER STEERING ECU |
Turn the ignition switch on (IG).
Measure the voltage of the ECU.
- Standard voltage:
Tester Connection
| Condition
| Specified Condition
|
h2-4 (TRQF) - h2-1 (TRQG)
| Always
| 3.35 to 3.37 V
|
h2-3 (TRQV) - h2-1 (TRQG)
| Always
| 8.5 to 10.5 V
|
| REPLACE POWER STEERING ECU |
|
|
Turn the ignition switch on (IG).
Measure the voltage of the ECU.
- Standard voltage:
Tester Connection
| Condition
| Specified Condition
|
h2-6 (TRQ1) - h2-1 (TRQG)
| Steering wheel not turned (without load)
| 2.3 to 2.7 V
|
Steering wheel turned to right with vehicle stopped
| 2.5 to 4.04 V
|
Steering wheel turned to left with vehicle stopped
| 0.95 to 2.5 V
|
h2-2 (TRQ2) - h2-1 (TRQG)
| Steering wheel not turned (without load)
| 2.3 to 2.7 V
|
Steering wheel turned to right with vehicle stopped
| 0.95 to 2.5 V
|
Steering wheel turned to left with vehicle stopped
| 2.5 to 4.04 V
|
Add the voltage measured at terminal TRQ1 minus 2.5 V to the voltage measured at terminal TRQ2 minus 2.5 V.
- OK:
- Below 0.4 V (Absolute value)
| REPLACE STEERING COLUMN ASSEMBLY |
|
|
OK |
|
|
|
REPLACE POWER STEERING ECU |
|