Front Speed Sensor Removal

Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Brake Control. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT WHEEL

  3. REMOVE FRONT FENDER LINER LH

  4. REMOVE FRONT SPEED SENSOR LH

Front Speed Sensor -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


2. REMOVE FRONT WHEEL


3. REMOVE FRONT FENDER LINER LH

  1. Partially remove the front fender liner.

    HINT:
    It is not necessary to fully remove the fender liner. Partially remove it so that the speed sensor connector can be disconnected in a later step.


4. REMOVE FRONT SPEED SENSOR LH


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Front Speed Sensor Removal

  1. Disconnect the sensor connector.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Front Speed Sensor Removal

  1. Remove the sensor clip (labeled A), bolt (labeled B) and sensor clamp (labeled C).



  1. Remove the sensor clip (labeled D), bolt (labeled E) and sensor clamp (labeled F).


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Front Speed Sensor Removal



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Front Speed Sensor Removal

  1. Remove the bolt and sensor from the knuckle.

    NOTICE:
    Keep the sensor tip and sensor installation hole free from foreign matter.