Securities. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Engine Immobiliser. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Engine Immobiliser System (W/O Entry And Start System) -- How To Proceed With Troubleshooting |
- HINT:
- Use these procedures to troubleshoot the engine immobiliser system.
- *: Use the intelligent tester.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
|
3.CRANK ENGINE FOR MORE THAN 10 SECONDS |
|
4.CHECK FOR DTC* |
Check for DTCs and make a note of any codes that are output (RAV4_ACA30 RM000001TCQ00EX.html).
Clear the DTC.
Recheck for DTCs. Based on the DTC output in the first step, try to cause the output of the same SFI system DTC or engine immobiliser system DTC by simulating the original activity indicated by the DTC.
Result: Result Proceed to DTC output does not reoccur A SFI system DTC output reoccurs B Engine immobiliser system DTC output reoccurs C
|
| ||||
|
| ||||
|
5.PROBLEM SYMPTOMS TABLE |
Result | Proceed to |
Fault is not listed in problem symptoms table | A |
Fault is listed in problem symptoms table | B |
|
| ||||
|
6.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Data List / Active Test (RAV4_ACA30 RM000001TCS00BX.html)
Terminals of ECU (RAV4_ACA30 RM000001TCC009X.html)
Inspection (RAV4_ACA30 RM000001VTZ002X.html)
|
7.ADJUST, REPAIR OR REPLACE |
|
8.CONFIRMATION TEST |
| |||||
|
---|