Securities. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Engine Immobiliser. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Engine Immobiliser System (W/ Entry And Start System) -- Data List / Active Test |
| READ DATA LIST |
- HINT:
- Using the intelligent tester Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and turn the tester ON.
Select the following menu items: Body / Entry&Start / Data List.
Check the results by referring to the table below.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Ignition Switch | Engine switch on (IG) signal / ON or OFF | ON: Engine switch on (ACC, IG) or start OFF: Engine switch off | - |
| ACC Switch | Engine switch on (ACC) signal / ON or OFF | ON: Engine switch on (ACC, IG) or start OFF: Engine switch off | - |
| ID-BOX Sleep Condition | ID code box sleep condition / YES or NO | - | - |
| ID-BOX Start Condition | ID code box wake up signal / YES or NO | - | - |
| EFI Code Receive | SFI code receive / OK or NG | OK: SFI code is received NG: SFI code is not received | - |
| Engine Start Request | ID code box start request condition / OK or NG | OK: Start request condition signal is received NG: Start request condition signal is not received | - |
| 3bit Code Request | 3 bit code request / OK or NG | OK: 3 bit code is received NG: 3 bit code is not received | - |
| S Code Check | Code verification result / OK or NG | OK: Verification confirmed NG: Verification is not confirmed | - |
| L Code Check | Code verification result / OK or NG | OK: Verification confirmed NG: Verification is not confirmed | - |