Dtc 58-40 Gps Antenna Error
Navigation. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
DESCRIPTION
INSPECTION PROCEDURE
CHECK NAVIGATION ANTENNA ASSEMBLY
INSPECT NAVIGATION ANTENNA ASSEMBLY
REPLACE NAVIGATION RECEIVER ASSEMBLY
DTC 58-40 GPS Antenna Error |
DTC 58-41 GPS Antenna Power Source Error |
DTC 80-40 GPS Antenna Error |
DTC 80-41 GPS Antenna Power Source Error |
DESCRIPTION
DTC Code
| DTC Detection Condition
| Trouble Area
|
58-40
| Navigation antenna error.
| - Navigation antenna assembly
- Navigation receiver assembly
|
58-41
| An error of the power source to the navigation antenna.
|
80-40
| Navigation antenna error.
|
80-41
| An error of the power source to the navigation antenna.
|
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs (RAV4_ACA30 RM0000011BU05HX.html).
| 1.CHECK NAVIGATION ANTENNA ASSEMBLY |
Check that the navigation antenna is securely connected to the navigation receiver assembly connector.
- OK:
- The navigation antenna is securely connected.
| | REINSTALL NAVIGATION ANTENNA ASSEMBLY |
|
|
| 2.INSPECT NAVIGATION ANTENNA ASSEMBLY |
Disconnect the navigation antenna connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
1 - 2
| Always
| 50 to 500 Ω
|
| 3.REPLACE NAVIGATION RECEIVER ASSEMBLY |
Replace the navigation receiver assembly with a new or normally functioning one and check if the same problem occurs again.
Clear the DTCs (RAV4_ACA30 RM0000011BU05HX.html).
Recheck for DTCs and check if the same trouble occurs again.
- OK:
- The same problem does not occur.
