Dtc P0604 Internal Control Module Random Access Memory (Ram) Error

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Az-Fe Engine Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

INSPECTION PROCEDURE

CHECK WHETHER DTC OUTPUT RECURS

DTC P0604 Internal Control Module Random Access Memory (RAM) Error

DTC P0606 ECM / PCM Processor

DTC P060A Internal Control Module Monitoring Processor Performance

DTC P060D Internal Control Module Accelerator Pedal Position Performance

DTC P060E Internal Control Module Throttle Position Performance

DTC P0657 Actuator Supply Voltage Circuit / Open

DTC P1607 Cruise Control Input Processor


DESCRIPTION

The ECM continuously monitors its internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check ensures that the ECM is functioning properly. If any malfunction is detected, the ECM sets the appropriate DTC and illuminates the MIL.
The ECM memory status is diagnosed by internal "mirroring" of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The 2 CPU also perform continuous mutual monitoring. The ECM illuminates the MIL and set a DTC if: 1) outputs from the 2 CPUs are different or deviate from the standard, 2) the signals sent to the throttle actuator deviate from the standard, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.

DTC No.
DTC Detection Condition
Trouble Area
P0604
P0606
P060A
P060D
P060E
P0657
P1607
ECM internal error (1 trip detection logic)
ECM

INSPECTION PROCEDURE

Read freeze frame data using the intelligent tester. Freeze frame data records the engine conditions when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.
1.CHECK WHETHER DTC OUTPUT RECURS
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG) and turn the tester ON.

  1. Select the following menu items: Powertrain / Engine and ECT / DTC.

  1. Read the DTC.

Result:
Display (DTC output)
Proceed to
DTC P0604, P0606, P060A, P060D, P060E, P0657 and/or P1607 is output
A
DTC is not output
B


B
CHECK FOR INTERMITTENT PROBLEMS (RAV4_ACA30 RM000000PDQ0AKX.html)
A

REPLACE ECM (RAV4_ACA30 RM0000017UO01HX.html)