4Wd Control Switch (W/ Combination Switch) Inspection


  1. INSPECT CENTER CLUSTER MODULE SWITCH (TRANSFER POSITION SWITCH)

4Wd Control Switch (W/ Combination Switch) -- Inspection



1. INSPECT CENTER CLUSTER MODULE SWITCH (TRANSFER POSITION SWITCH)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Vf4Bm Transfer 4Wd Awd.Transfer System.4Wd Control Switch (W/ Combination Switch) Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    16 (LO) - 24 (E)
    		H4
    		10 kΩ or higher
    L4
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Center Cluster Module Switch (Transfer Position Switch))
    If the result is not as specified, replace the center cluster module switch (transfer position switch).


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Vf4Bm Transfer 4Wd Awd.Transfer System.4Wd Control Switch (W/ Combination Switch) Inspection

  1. Apply battery voltage between the terminals of the switch, and check the illumination condition of the center cluster module switch (transfer position switch).

    Standard:
    Measurement Condition
    		Switch Condition
    Battery positive (+) → 13 (ILL+) Battery negative (-) → 12 (ILL-)
    		Illuminates
    Text in Illustration
    *a
    		Component without harness connected
    (Center Cluster Module Switch (Transfer Position Switch))
    *b
    		Center Cluster Module Switch (Transfer Position Switch) Illumination
    If the result is not as specified, replace the center cluster module switch (transfer position switch).