Dtc C1Abc Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete
DESCRIPTION
INSPECTION PROCEDURE
PROCEED TO TEST MODE (BLIND SPOT MONITOR BEAM AXIS INSPECTION)
DTC C1ABC Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete |
DESCRIPTION
This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor RH.- HINT:
- This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that beam axis inspection is performed. Completing the beam axis inspection after replacing a blind spot monitor sensor prevents this DTC from being output.
DTC Code
| DTC Detection Condition
| Trouble Area
|
C1ABC
| A beam axis inspection has not been performed.
| Blind spot monitor sensor RH
|
INSPECTION PROCEDURE
| 1.PROCEED TO TEST MODE (BLIND SPOT MONITOR BEAM AXIS INSPECTION) |
Change the blind spot monitor sensor RH to Test Mode using the GTS.
- HINT:
- Refer to Blind Spot Monitor Beam Axis Inspection (LandCruiser RM000004RXS025X.html).