Navigation Ecu -- Installation |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL TELEPHONE ANTENNA CORD SUB-ASSEMBLY |
Connect the connector to install the telephone antenna cord sub-assembly.
| 2. INSTALL NAVIGATION ECU |
Insert the navigation ECU as shown in the illustration.
 |
Install the navigation ECU with the 4 bolts.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
Attach the clamp.
Connect the connector.
| 3. INSTALL NO. 1 NAVIGATION WIRE |
Connect each connector to install the No. 1 navigation wire.
| 4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY |
Connect each connector.
Insert the radio and display receiver assembly and attach the 7 clips on the backside of the radio and display receiver assembly.
- NOTICE:
- When inserting the receiver, do not press the knobs on it.
 |
Install the radio and display receiver assembly with the 4 bolts.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
| 5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the integration control and panel assembly.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |