Can Communication System (For Rhd Without Entry And Start System) Problem Symptoms Table

Can Communication System (For Rhd Without Entry And Start System) -- Problem Symptoms Table


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Result of CAN V1 Bus Check
Symptom
Suspected Area
See page
Result of "How to proceed with Troubleshooting" is "Open in CAN Main Wire"
Open in CAN Main Wire
LandCruiser RM000002L82065X.html
Result of "How to Proceed with Troubleshooting" is "Short in CAN Bus Lines"
Short in CAN Bus Lines
LandCruiser RM000002L7Z0F5X.html
Result of "How to Proceed with Troubleshooting" is "Short to B+ in CAN Bus Line"
Short to B+ in CAN Bus Line
LandCruiser RM000002L7Z0F6X.html
Result of "How to Proceed with Troubleshooting" is "Short to GND in CAN Bus Line"
Short to GND in CAN Bus Line
LandCruiser RM000002L7Z0F7X.html
Result of "How to Proceed with Troubleshooting" is "Open in One Side of CAN Branch Line"
Open in One Side of CAN Branch Line
LandCruiser RM000001YZM07IX.html
HINT:
Refer to How to Proceed with Troubleshooting for the CAN V1 Bus Check procedure.

Communication Stop Mode Table
Symptom
Suspected Area
See page
"Skid Control (ABS/VSC/TRAC)" is not displayed on the intelligent tester*1
Brake Actuator (Skid Control ECU) Communication Stop Mode
LandCruiser RM0000039LU052X.html
"Skid Control (ABS/VSC/TRAC)" is not displayed on the intelligent tester*2
Skid Control ECU Communication Stop Mode
LandCruiser RM0000039LU051X.html
"Air Conditioning Amplifier" is not displayed on the intelligent tester
Air Conditioning Amplifier Communication Stop Mode
LandCruiser RM000001RTD04VX.html
"PPS" is not displayed on the intelligent tester*3
Power Steering ECU Communication Stop Mode
LandCruiser RM000003F7B03QX.html
"CAN Gateway1" is not displayed on the intelligent tester*4
Gateway ECU Communication Stop Mode
LandCruiser RM000004U3100FX.html
"Spiral cable (Steering Angle Sensor)" is not displayed on the intelligent tester*2
Steering Angle Sensor Communication Stop Mode
LandCruiser RM000002TGF05ZX.html
"Yaw Rate Sensor" is not displayed on the intelligent tester
Yaw Rate Sensor Communication Stop Mode
LandCruiser RM000003TN3032X.html
"ECM (Engine)" is not displayed on the intelligent tester
ECM Communication Stop Mode
LandCruiser RM000001RSZ069X.html
"Main Body" is not displayed on the intelligent tester
Main Body ECU Communication Stop Mode
LandCruiser RM000001RTG06LX.html
"Combination Meter" is not displayed on the intelligent tester
Combination Meter ECU Communication Stop Mode
LandCruiser RM000001TNA05ZX.html
"Airbag" is not displayed on the intelligent tester
Center Airbag Sensor Communication Stop Mode
LandCruiser RM000001TN9060X.html
"Four Wheel Drive Control" is not displayed on the intelligent tester
4WD Control ECU Communication Stop Mode
LandCruiser RM00000109K0ENX.html
"Display and Navigation (AVN1)" is not displayed on the intelligent tester*5
Audio Receiver Assembly Communication Stop Mode
LandCruiser RM00000109K0EOX.html
  1. *1: w/o Vehicle Stability Control System
  2. *2: w/ Vehicle Stability Control System (for Hydraulic Brake Booster)
  3. *3: for 1KD-FTV
  4. *4: w/ TOYOTA Parking Assist-sensor System (for 4 Sensor Type)
  5. *5: w/ Audio and Visual System (for Radio and Display Type)