Can Communication System (For Lhd Without Entry And Start System) Problem Symptoms Table

Can Communication System (For Lhd Without Entry And Start System) -- Problem Symptoms Table

HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Result of CAN V1 Bus Check
Symptom	Suspected Area	See page
Result of "How to proceed with Troubleshooting" is "Open in CAN Main Wire"	Open in CAN Main Wire	LandCruiser RM000002L82063X.html
Result of "How to Proceed with Troubleshooting" is "Short in CAN Bus Lines"	Short in CAN Bus Lines	LandCruiser RM000002L7Z0EZX.html
Result of "How to Proceed with Troubleshooting" is "Short to B+ in CAN Bus Line"	Short to B+ in CAN Bus Line	LandCruiser RM000002L7Z0F0X.html
Result of "How to Proceed with Troubleshooting" is "Short to GND in CAN Bus Line"	Short to GND in CAN Bus Line	LandCruiser RM000002L7Z0F1X.html
Result of "How to Proceed with Troubleshooting" is "Open in One Side of CAN Branch Line"	Open in One Side of CAN Branch Line	LandCruiser RM000001YZM07GX.html

HINT:

Refer to How to Proceed with Troubleshooting for the CAN V1 Bus Check procedure.

Communication Stop Mode Table
Symptom	Suspected Area	See page
"Skid Control (ABS/VSC/TRAC)" is not displayed on the intelligent tester*1	Brake Actuator (Skid Control ECU) Communication Stop Mode	LandCruiser RM0000039LU04ZX.html
"Skid Control (ABS/VSC/TRAC)" is not displayed on the intelligent tester*2	Skid Control ECU Communication Stop Mode	LandCruiser RM0000039LU04YX.html
"Air Conditioning Amplifier" is not displayed on the intelligent tester	Air Conditioning Amplifier Communication Stop Mode	LandCruiser RM000001RTD04UX.html
"PPS" is not displayed on the intelligent tester*3	Power Steering ECU Communication Stop Mode	LandCruiser RM000003F7B03OX.html
"CAN Gateway1" is not displayed on the intelligent tester*4	Gateway ECU Communication Stop Mode	LandCruiser RM000004U3100EX.html
"Spiral cable (Steering Angle Sensor)" is not displayed on the intelligent tester*3	Steering Angle Sensor Communication Stop Mode	LandCruiser RM000002TGF05XX.html
"Yaw Rate Sensor" is not displayed on the intelligent tester	Yaw Rate Sensor Communication Stop Mode	LandCruiser RM000003TN3030X.html
"ECM (Engine)" is not displayed on the intelligent tester	ECM Communication Stop Mode	LandCruiser RM000001RSZ067X.html
"Main Body" is not displayed on the intelligent tester	Main Body ECU Communication Stop Mode	LandCruiser RM000001RTG06JX.html
"Combination Meter" is not displayed on the intelligent tester	Combination Meter ECU Communication Stop Mode	LandCruiser RM000001TNA05XX.html
"Airbag" is not displayed on the intelligent tester	Center Airbag Sensor Communication Stop Mode	LandCruiser RM000001TN905YX.html
"Four Wheel Drive Control" is not displayed on the intelligent tester	4WD Control ECU Communication Stop Mode	LandCruiser RM00000109K0EIX.html
"Display and Navigation (AVN1)" is not displayed on the intelligent tester*5	Audio Receiver Assembly Communication Stop Mode	LandCruiser RM00000109K0EJX.html

*1: for 2TR-FE, 5L-E
*2: for 1KD-FTV
*3: w/ Vehicle Stability Control System
*4: w/ Network Gateway ECU
*5: w/ Audio and Visual System (for Radio and Display Type)