Input Shaft Inspection

Apply gear oil to the cone of the input shaft, and check that the No. 2 synchronizer ring does not turn in either direction while pushing the No. 2 synchronizer ring.

1. If the No. 1 synchronizer ring turns, replace it.
   

Push the No. 2 synchronizer ring against the cone of the input shaft. Measure the clearance between the No. 2 synchronizer ring and input shaft.

Standard clearance:

0.70 to 1.70 mm (0.0276 to 0.0669 in.)

1. If the clearance is not as specified, replace the synchronizer ring No. 2 with a new one.