Parking Assist Ecu (For Lhd) Removal


  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

  4. REMOVE COWL SIDE TRIM BOARD RH

  5. REMOVE INSTRUMENT SIDE PANEL RH

  6. REMOVE INSTRUMENT PANEL ORNAMENT

  7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

  9. REMOVE PARKING ASSIST ECU

Parking Assist Ecu (For Lhd) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).


3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Parking Assist Ecu (For Lhd) Removal

  1. Put protective tape around the door scuff plate assembly RH.

  1. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate assembly RH.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


4. REMOVE COWL SIDE TRIM BOARD RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the clip.

  1. Detach the clip and claw and remove the cowl side trim board RH.



5. REMOVE INSTRUMENT SIDE PANEL RH


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Parking Assist Ecu (For Lhd) Removal

  1. Put protective tape around the instrument side panel.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 5 clips, claw, and 3 guides.

  1. Disconnect the connector and remove the instrument side panel.



6. REMOVE INSTRUMENT PANEL ORNAMENT


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Parking Assist Ecu (For Lhd) Removal

  1. Put protective tape around the instrument panel ornament.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 5 clips and remove the instrument panel ornament.



7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. Remove the screw.



  1. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Parking Assist Ecu (For Lhd) Removal


    Text in Illustration
    *A
    		for LHD
    		*B
    		for RHD


8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Park Assist Monitoring.Toyota Parking Assist-Sensor System (W/ Multi-Display).Parking Assist Ecu (For Lhd) Removal

  1. Remove the 2 bolts <C> and 2 screws <A> or <B>.

    Text in Illustration
    *1
    		Bolt
    *2
    		Screw

  1. Detach the 5 clips and claw.

  1. Disconnect each connector and remove the glove compartment door.



9. REMOVE PARKING ASSIST ECU


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect each connector.

  1. Remove the 2 bolts and parking assist ECU.