Curtain Shield Airbag Assembly Installation


  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)

  2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)

  3. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)

  4. INSTALL REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)

  5. INSTALL NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)

  6. INSTALL NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)

  7. INSTALL ROOF HEADLINING ASSEMBLY

Curtain Shield Airbag Assembly -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)
  1. Check that the ignition switch is off.

  1. Check that the cable is disconnected from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
  1. Install the curtain shield airbag with the 17 new bolts.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}
    NOTICE:
    Do not twist the curtain shield airbag when installing it.
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)
  1. Install the curtain shield airbag with the 13 new bolts.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}
    NOTICE:
    Do not twist the curtain shield airbag when installing it.
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


3. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)
  1. Install the curtain shield airbag with the 11 new bolts.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}
    NOTICE:
    Do not twist the curtain shield airbag when installing it.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


4. INSTALL REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)
  1. Attach the 4 claws to install the rear side rail spacer.

  1. Install the clip.



5. INSTALL NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)
  1. Install the duct with the 4 clips.



6. INSTALL NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)
  1. Install the duct with the 2 clips and attach the clamp.



7. INSTALL ROOF HEADLINING ASSEMBLY
  1. for 5 Door:

    1. Install the roof headlining (LandCruiser RM0000046JJ02NX.html).

  1. for 3 Door:

    1. Install the roof headlining (LandCruiser RM0000046JO00WX.html).