Personal Light (For Front Door) Removal


  1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH

  2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH

  3. REMOVE FRONT DOOR ARMREST COVER LH

  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

  5. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH

  6. REMOVE FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH

  7. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

Personal Light (For Front Door) -- Removal


HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH side and LH side.
  4. The procedure listed below is for the LH side.


1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Detach the 2 clips and remove the front door lower frame bracket garnish LH.



2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a moulding remover, detach the 3 claws and remove the inside handle bezel as shown in the illustration.



3. REMOVE FRONT DOOR ARMREST COVER LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using moulding remover A, detach the 8 claws and remove the assist grip cover.



4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 3 screws.

  1. Remove the 12 clips.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Int).Lighting System.Personal Light (For Front Door) Removal

  1. Pull out the front door trim board sub-assembly in the direction indicated by the arrow in the illustration.

    Text in Illustration
    *1
    		Reference Boss

  1. Raise the front door trim board sub-assembly to detach the 4 claws and remove the front door trim board sub-assembly together with the front door inner glass weatherstrip LH.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the 2 connectors.



  1. w/ Seat Position Memory System:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Disconnect the connectors.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.



5. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Using a screwdriver, detach the 4 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the illustration.



6. REMOVE FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Int).Lighting System.Personal Light (For Front Door) Removal

  1. Disconnect the connector.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a screwdriver, detach the claw and remove the light.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the connector.

  1. Detach the clamp.

  1. Turn the light in the direction indicated by the arrow and remove it.