Tire And Wheel System Inspection

Check the tires for wear and proper inflation pressure.

Cold Tire Inflation Pressure (for Europe):

Tire Size	Front kPa (kgf/cm2, psi)	Rear kPa (kgf/cm2, psi)
P245/70R17 108S	220 (2.2, 32)	220 (2.2, 32)
245/70R17 110S	220 (2.2, 32)	220 (2.2, 32)
P265/65R17 110S	220 (2.2, 32)	220 (2.2, 32)
265/65R17 112S	220 (2.2, 32)	220 (2.2, 32)
P265/60R18 109H	220 (2.2, 32)	220 (2.2, 32)
265/60R18 110H	220 (2.2, 32)	220 (2.2, 32)

Cold Tire Inflation Pressure (for Eastern Europe and Russia):

Tire Size	Front kPa (kgf/cm2, psi)	Rear kPa (kgf/cm2, psi)
245/70R17 110S	200 (2.0, 29)	200 (2.0, 29)
265/65R17 112S	200 (2.0, 29)	200 (2.0, 29)
265/60R18 110H	200 (2.0, 29)	200 (2.0, 29)

Cold Tire Inflation Pressure (for General Export, Australia, G.C.C.):

Tire Size	Front kPa (kgf/cm2, psi)	Rear kPa (kgf/cm2, psi)
245/70R17 110S	200 (2.0, 29)	200 (2.0, 29)
265/65R17 112S	200 (2.0, 29)	200 (2.0, 29)
265/60R18 110H	200 (2.0, 29)	200 (2.0, 29)

Using a dial indicator, check the tire runout.

Standard tire runout:

2.0 mm (0.0787 in.) or less

Rotate the tires as shown in the illustration.

Torque:

for steel wheel:

112 N*m{1137 kgf*cm, 82 ft.*lbf}

for aluminum wheel:

103 N*m{1050 kgf*cm, 76 ft.*lbf}

for Steel Wheel Type:
Check and adjust the off-the-car balance.

Standard Imbalance After Adjustment:

12 g (0.0265 lb.) or less

HINT:

If necessary, check and adjust the on-the-car balance.

for Aluminum Wheel Type:
Check and adjust the off-the-car balance.

Standard Imbalance After Adjustment:

6.0 g (0.0132 lb.) or less

NOTICE:

1. Using a cleaning detergent, remove dirt, oil and water from the surface where the balance weight is to be adhered.
   
2. Do not touch the adhesive surface of the tape.
   
3. Attach a sticking type balance weight to the flat surface (A) shown in the illustration.
   

   Width (A):

   25 mm (0.984 in.)
   

4. Push the balance weight securely with your finger so that it securely adheres to the position.
   
5. Do not reuse the balance weight.
   

HINT:

1. For 17 inch wheels, the outer side balance weight should be installed by clipping it to the rim.
   
2. If necessary, check and adjust the on-the-car balance.