Manual Transmission System -- On-Vehicle Inspection |
1. CHECK TRANSMISSION OIL |
![]() |
Park the vehicle on a level surface.
Remove the transmission filler plug and gasket.
Check that the oil level is within 5 mm (0.196 in.) of the lowest point of the transmission filler plug opening.
If the result is not as specified, add transmission oil.- Oil Grade:
- Toyota Genuine Transfer Gear oil LF or equivalent
- Viscosity:
- SAE 75W
- Standard capacity:
- 2.1 liters (2.2 US qts, 1.8 Imp. qts)
- NOTICE:
- Too much or too little oil will lead to transmission problems.
- After adjusting the oil level, drive the vehicle and check the oil level again.
Inspect for oil leaks when the oil level is low.
Install a new gasket and the transmission filler plug.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}