Oil Pressure Switch Installation


  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

  2. INSPECT FOR ENGINE OIL LEAK

  3. INSTALL FRONT FENDER APRON SEAL RH

Oil Pressure Switch -- Installation



1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

  1. Apply adhesive to 2 or 3 threads of the oil pressure switch.

    Adhesive:
    Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
    NOTICE:
    Do not apply adhesive to the oil inlet port of the oil pressure switch.

  1. Using a 24 mm deep socket wrench, install the oil pressure switch.

    Torque:
    15 N*m{153 kgf*cm, 11 ft.*lbf}
    NOTICE:
    Do not start the engine within 1 hour of installation.

  1. Connect the oil pressure switch connector.



2. INSPECT FOR ENGINE OIL LEAK

  1. Start the engine. Make sure that there are no oil leaks from the area that was worked on.



3. INSTALL FRONT FENDER APRON SEAL RH

  1. Install the apron seal with the 5 clips.