Air Conditioning System (For Automatic Air Conditioning System) Data List / Active Test

  1. DATA LIST

  1. ACTIVE TEST

Air Conditioning System (For Automatic Air Conditioning System) -- Data List / Active Test



DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus:

    1. Body / Air Conditioner / Data List.
    2. Powertrain / Engine and ECT / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Air Conditioner
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Room Temperature Sensor
    		Cooler thermistor (room temperature sensor) /
    Min.: -6.5°C (20.3°F)
    Max.: 57.25°C (135.05°F)
    		Actual room temperature for front seat displayed
    		Open in the circuit: -6.5°C (20.3°F).
    Short in the circuit: 57.25°C (135.05°F).
    Ambient Temp Sensor
    		Cooler thermistor (ambient temperature sensor) /
    Min.: -23.3°C (-9.94°F)
    Max.: 65.95°C (150.71°F)
    		Actual ambient temperature displayed
    		Open in the circuit: -23.3°C (-9.94°F).
    Short in the circuit: 65.95°C (150.71°F).
    Adjusted Ambient Temp
    		Adjusted ambient temperature /
    Min.: -30.8°C (-23.44°F)
    Max.: 50.8°C (123.44°F)
    		Adjusted ambient temperature displayed
    		-
    Evaporator Fin Thermistor
    		No. 1 cooler thermistor /
    Min.: -29.7°C (-21.46°F)
    Max.: 59.55°C (139.19°F)
    		Actual evaporator temperature displayed
    		Open in the circuit: -29.7°C (-21.46°F).
    Short in the circuit: 59.55°C (139.19°F).
    Evaporator Target Temp
    		Target evaporator temperature /
    Min.: -327.68°C (-557.82°F)
    Max.: 327.67°C (621.81°F)
    		Target evaporator temperature displayed
    		-
    Solar Sensor (D Side)
    		Automatic light control sensor (solar sensor) / Min.: 0, Max.: 255
    		Driver side solar sensor voltage increases as brightness increases
    		Open in the circuit: 0.
    Short in the circuit: 255.
    Solar Sensor (P Side)
    		Automatic light control sensor (solar sensor) / Min.: 0, Max.: 255
    		Passenger side solar sensor voltage increases as brightness increases
    		Open in the circuit: 0.
    Short in the circuit: 255.
    Engine Coolant Temp
    		Engine coolant temperature /
    Min.: 1.3°C (34.34°F)
    Max.: 90.55°C (194.99°F)
    		Actual engine coolant temperature displayed
    		-
    Set Temperature (D Side)
    		Driver side set temperature /
    MAX COLD: 0°C (32°F)
    MAX HOT: 30°C (86°F)
    		Driver side set temperature displayed
    		-
    Set Temperature (P Side)
    		Passenger side set temperature /
    MAX COLD: 0°C (32°F)
    MAX HOT: 30°C (86°F)
    		Passenger side set temperature displayed
    		-
    Blower Motor Speed Level
    		Blower with fan motor sub-assembly speed level / Min.: 0, Max.: 31
    		Increases in range from 0 to 31 as blower with fan motor sub-assembly speed increases
    		-
    Regulator Pressure Sensor
    		Refrigerant pressure sensor /
    Min.: -0.4566 MPa
    Max.: 3.2943 MPa
    		Actual refrigerant pressure displayed
    		-
    Room Temp Sensor (Rear)*1
    		Cooler thermistor (rear room temperature sensor) /
    Min.: -6.5°C (20.3°F)
    Max.: 57.25°C (135.05°F)
    		Actual rear cabin temperature displayed
    		-
    Evap Temp Sens (Rear)*1
    		Rear evaporator temperature sensor /
    Min.: -29.7°C (-21.46°F)
    Max.: 59.25°C (138.65°F)
    		Actual rear evaporator temperature displayed
    		-
    Set Temperature (Rear)*1
    		Rear set temperature /
    Min.: 0°C (32°F)
    Max.: 30°C (86°F)
    		Actual rear set temperature displayed
    		-
    Blower Motor Level (Rear)*1
    		Rear blower with fan motor sub-assembly speed level / Min.: 0, Max.: 31
    		Increases in range from 0 to 31 as rear blower with fan motor sub-assembly speed increases
    		-
    Air Outlet Servo Pulse (R)*1
    		Rear mode damper servo sub-assembly target pulse / Min.: 0, Max.: 255
    		83 (pulse): FACE
    41 (pulse): B/L
    7 (pulse): FOOT
    		-
    Air Outlet Servo Actual Pls(R)*1
    		Rear mode damper servo sub-assembly actual pulse / Min.: 0, Max.: 255
    		83 (pulse): FACE
    41 (pulse): B/L
    7 (pulse): FOOT
    		-
    Air Mix Servo Targ Pulse(R)*1
    		Rear air mix damper servo sub-assembly target pulse / Min.: 0, Max.: 255
    		9 (pulse): MAX COOL
    54 (pulse): MAX HOT
    		-
    Air Mix Servo Actual Pulse(R)*1
    		Rear air mix damper servo sub-assembly actual pulse / Min.: 0, Max.: 255
    		9 (pulse): MAX COOL
    54 (pulse): MAX HOT
    		-
    Air Mix Servo Targ Pulse (D)
    		Damper servo sub-assembly (driver side air mix damper servo) target pulse / Min.: 0, Max.: 255
    		for LHD:
    1. 107 (pulse): MAX COOL
    2. 26 (pulse): MAX HOT
    for RHD:
    1. 112 or 127 (pulse): MAX COOL
    2. 21 or 31 (pulse): MAX HOT
    		-
    Air Mix Servo Actual Pulse (D)
    		Damper servo sub-assembly (driver side air mix damper servo) actual pulse / Min.: 0, Max.: 255
    		for LHD:
    1. 107 (pulse): MAX COOL
    2. 26 (pulse): MAX HOT
    for RHD:
    1. 112 or 127 (pulse): MAX COOL
    2. 21 or 31 (pulse): MAX HOT
    		-
    Air Mix Servo Targ Pulse (P)
    		Damper servo sub-assembly (front passenger side air mix damper servo) target pulse / Min.: 0, Max.: 255
    		for LHD:
    1. 112 or 127 (pulse): MAX COOL
    2. 21 or 31 (pulse): MAX HOT
    for RHD:
    1. 107 (pulse): MAX COOL
    2. 26 (pulse): MAX HOT
    		-
    Air Mix Servo Actual Pulse (P)
    		Damper servo sub-assembly (front passenger side air mix damper servo) actual pulse / Min.: 0, Max.: 255
    		for LHD:
    1. 112 or 127 (pulse): MAX COOL
    2. 21 or 31 (pulse): MAX HOT
    for RHD:
    1. 107 (pulse): MAX COOL
    2. 26 (pulse): MAX HOT
    		-
    Air Outlet Servo Pulse (D)
    		Damper servo sub-assembly (mode damper servo) target pulse / Min.: 0, Max.: 255
    		15 (pulse): FACE 1
    23 (pulse): FACE 2
    41 (pulse): B/L
    65 or 73 (pulse): FOOT
    83 or 95 (pulse): F/D
    113 (pulse): DEF
    		-
    Air Outlet Servo Actu Pulse (D)
    		Damper servo sub-assembly (mode damper servo) actual pulse / Min.: 0, Max.: 255
    		15 (pulse): FACE 1
    23 (pulse): FACE 2
    41 (pulse): B/L
    65 or 73 (pulse): FOOT
    83 or 95 (pulse): F/D
    113 (pulse): DEF
    		-
    Air Inlet Damper Targ Pulse
    		Recirculation damper servo sub-assembly target pulse / Min.: 0, Max.: 255
    		7 (pulse): Recirculation
    28 (pulse): Fresh
    		-
    Air Inlet Damper Actual Pulse
    		Recirculation damper servo sub-assembly actual pulse / Min.: 0, Max.: 255
    		7 (pulse): Recirculation
    28 (pulse): Fresh
    		-
    Electric Heater Count*2
    		Maximum electric heater operation level / Min.: 0, Max.: 3
    		Maximum possible operation of electric heater displayed
    		-
    Electric Heater Active Level*2
    		Number of electric heaters operating / Min.: 0, Max.: 3
    		-
    		-
    Shift Set Temperature
    		Set temperature shift / 2C incr, 1C incr, Normal, 1C decr or 2C decr
    		Customized setting displayed
    		-
    Air Inlet Mode
    		Air inlet mode / Auto or Manual
    		Customized setting displayed
    		-
    Compressor Mode
    		Compressor mode / Auto or Manual
    		Customized setting displayed
    		-
    Add Foot Air in FACE Mode
    		Add foot air in face mode / ON or OFF
    		Customized setting displayed
    		-
    Foot/DEF Auto Mode
    		Foot/Def auto mode / ON or OFF
    		Customized setting displayed
    		-
    Foot/DEF Auto Blow Up
    		Foot/Def auto blower level function / ON or OFF
    		Customized setting displayed
    		-
    IDLE UP/PWR HEAT Switch*3
    		Idle up switch or heater switch assembly / ON or OFF
    		ON: Idle up switch or heater switch assembly on
    OFF: Idle up switch and heater switch assembly off
    		-
    Outside Air Mode Auto Switch Function
    		Switch ON/OFF the function to switch the suction opening to the outside air mode automatically when the ignition switch is turned off / OFF or ON
    		Customized setting displayed
    		-
    Number of Trouble Codes
    		Number of trouble codes / Min.: 0, Max.: 255
    		Number of DTCs stored
    		-

    1. *1: w/ Rear Air Conditioning System
    2. *2: w/ PTC Heater
    3. *3: w/ Idle Up Switch or Viscous Heater

    Engine and ECT
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    A/C Signal
    		A/C signal / ON or OFF
    		ON: A/C switch on
    OFF: A/C switch off
    		-

ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Air Conditioner / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Air Conditioner
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Blower Motor
    		Blower with fan motor sub-assembly
    		Min.: 0, Max.: 31
    		-
    Magnetic Clutch Relay
    		Magnet clutch relay operation
    		ON or OFF
    		-
    Defogger Relay (Rear)
    		Rear window defogger relay operation
    		ON or OFF
    		-
    Electrical Fan*1
    		Motor cooling fan operation
    		ON or OFF
    		-
    Heater Active Level*2
    		Heater level
    		Min.: 0, Max.: 3
    		-
    Air Mix Servo Targ Pulse (D)
    		Damper servo sub-assembly (driver side air mix damper servo) target pulse
    		Min.: 0, Max.: 255
    		-
    Air Mix Servo Targ Pulse (P)
    		Damper servo sub-assembly (front passenger side air mix damper servo) target pulse
    		Min.: 0, Max.: 255
    		-
    Air Outlet Servo Pulse (D)
    		Damper servo sub-assembly (mode damper servo) pulse
    		Min.: 0, Max.: 255
    		-
    Air Inlet Damper Targ Pulse
    		Recirculation damper servo sub-assembly target pulse
    		Min.: 0, Max.: 255
    		-
    Rear Blower Motor*3
    		Rear blower with fan motor sub-assembly
    		Min.: 0, Max.: 31
    		-
    Rear Air Mix Servo Targ Pulse*3
    		Rear air mix damper servo sub-assembly target pulse
    		Min.: 0, Max.: 255
    		-
    Viscous Heater*4
    		Viscous heater operation
    		ON or OFF
    		-
    A/O Servo Pulse(Rr D)*3
    		Rear mode damper servo sub-assembly pulse
    		Min.: 0, Max.: 255
    		-

    1. *1: except 1KD-FTV and w/ Rear Air Conditioning System
    2. *2: w/ PTC Heater
    3. *3: w/ Rear Air Conditioning System
    4. *4: w/ Viscous Heater