Rear Stabilizer Bar (W/ Kdss) Removal


  1. REMOVE SIDE STEP ASSEMBLY LH (for 5 Door)

  2. REMOVE STABILIZER CONTROL VALVE PROTECTOR

  3. DRAIN SUSPENSION FLUID

  4. REMOVE REAR STABILIZER LOWER BRACKET

  5. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY

  6. DISCONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY

  7. REMOVE REAR STABILIZER CONTROL CYLINDER

  8. REMOVE REAR STABILIZER LINK ASSEMBLY

Rear Stabilizer Bar (W/ Kdss) -- Removal



1. REMOVE SIDE STEP ASSEMBLY LH (for 5 Door)

  1. w/ Illumination:
    Disconnect the 2 connectors.



  1. Remove the 6 bolts and side step.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Rear Suspension.Rear Suspension System.Rear Stabilizer Bar (W/ Kdss) Removal



2. REMOVE STABILIZER CONTROL VALVE PROTECTOR


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts and stabilizer control valve protector.



3. DRAIN SUSPENSION FLUID


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Loosen the bleeder plug on the stabilizer control with accumulator housing assembly and drain suspension fluid.

    HINT:
    1. Drain suspension fluid when performing operations related to the hydraulic circuits.
    2. Draining suspension fluid decreases suspension fluid pressure.

  1. Tighten the bleeder plug.

    Torque:
    8.3 N*m{85 kgf*cm, 73 in.*lbf}


4. REMOVE REAR STABILIZER LOWER BRACKET


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 4 bolts and 2 rear stabilizer lower brackets.



5. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 bolts, 2 nuts and rear stabilizer bar.

    NOTICE:
    Turn the bolts while holding the nuts.

  1. Remove the 2 stabilizer bushes from the rear stabilizer bar.



6. DISCONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 union bolts and 2 pressure port gaskets and disconnect the rear stabilizer control tube from the rear stabilizer control cylinder.



7. REMOVE REAR STABILIZER CONTROL CYLINDER


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt, nut and rear stabilizer control cylinder.

    NOTICE:
    Do not hold the rear stabilizer control cylinder by the cylinder boot.
    HINT:
    Turn the nut while holding the bolt.

  1. Remove the 2 bleeder plug caps from the rear stabilizer control cylinder.



8. REMOVE REAR STABILIZER LINK ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the bolt, nut and rear stabilizer link assembly.

    HINT:
    Turn the nut while holding the bolt.