Rear Stabilizer Bar (W/ Kdss) Installation


  1. INSTALL REAR STABILIZER LINK ASSEMBLY

  2. INSTALL REAR STABILIZER CONTROL CYLINDER

  3. CONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY

  4. TEMPORARILY INSTALL REAR STABILIZER BAR SUB-ASSEMBLY

  5. INSTALL REAR STABILIZER LOWER BRACKET

  6. BLEED SUSPENSION FLUID

  7. STABILIZE SUSPENSION

  8. TIGHTEN REAR STABILIZER BAR SUB-ASSEMBLY

  9. INSTALL STABILIZER CONTROL VALVE PROTECTOR

  10. INSTALL SIDE STEP ASSEMBLY LH (for 5 Door)

  11. INSPECT VEHICLE HEIGHT

Rear Stabilizer Bar (W/ Kdss) -- Installation



1. INSTALL REAR STABILIZER LINK ASSEMBLY

  1. Install the rear stabilizer link assembly with the bolt and nut.

    Torque:
    100 N*m{1020 kgf*cm, 74 ft.*lbf}
    HINT:
    Turn the nut while holding the bolt.


2. INSTALL REAR STABILIZER CONTROL CYLINDER

  1. Install the 2 bleeder plug caps to the rear stabilizer control cylinder.

  1. Install the rear stabilizer control cylinder with the bolt and nut.

    Torque:
    100 N*m{1020 kgf*cm, 74 ft.*lbf}
    NOTICE:
    Do not hold the rear stabilizer control cylinder by the cylinder boot.
    HINT:
    Turn the nut while holding the bolt.


3. CONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Connect the rear stabilizer control tube to the rear stabilizer control cylinder with the 2 union bolts and 2 new pressure port gaskets.

    Torque:
    69 N*m{704 kgf*cm, 51 ft.*lbf}
    NOTICE:
    Insert the stoppers of the rear stabilizer control tube into the rear stabilizer control cylinder.


4. TEMPORARILY INSTALL REAR STABILIZER BAR SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Rear Suspension.Rear Suspension System.Rear Stabilizer Bar (W/ Kdss) Installation

  1. Install the 2 rear stabilizer bushes to the rear stabilizer bar.

    HINT:
    Install the stabilizer bush to the outer side of the stabilizer bush stopper on the stabilizer bar.
    Text in Illustration
    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
    		Outer Side

  1. Temporarily install the rear stabilizer bar with the 2 bolts and nuts.



5. INSTALL REAR STABILIZER LOWER BRACKET


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Support the rear stabilizer bar with a jack.

    NOTICE:
    Place a wooden block between the jack and rear stabilizer bar to prevent damage.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Rear Suspension.Rear Suspension System.Rear Stabilizer Bar (W/ Kdss) Installation

  1. Install the rear stabilizer bar and 2 rear stabilizer lower brackets with the 4 bolts.

    Torque:
    45 N*m{459 kgf*cm, 33 ft.*lbf}
    HINT:
    Check that the protrusions on the rear stabilizer bush are positioned within 180° of the rear stabilizer control cylinder and rear stabilizer link.
    Text in Illustration
    *1
    		Rear Stabilizer Control Cylinder
    *2
    		Rear Stabilizer Link


6. BLEED SUSPENSION FLUID

  1. Bleed the suspension fluid (LandCruiser RM0000038U7010X.html).



7. STABILIZE SUSPENSION

  1. Lower the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



8. TIGHTEN REAR STABILIZER BAR SUB-ASSEMBLY

  1. Tighten the 2 bolts and 2 nuts.

    Torque:
    110 N*m{1122 kgf*cm, 81 ft.*lbf}
    NOTICE:
    Turn the bolt while holding the nut.


9. INSTALL STABILIZER CONTROL VALVE PROTECTOR

  1. Install the stabilizer control valve protector with the 2 bolts.

    Torque:
    29 N*m{296 kgf*cm, 21 ft.*lbf}


10. INSTALL SIDE STEP ASSEMBLY LH (for 5 Door)

  1. Install the side step with the 6 bolts.

    Torque:
    18 N*m{184 kgf*cm, 13 ft.*lbf}

  1. w/ Illumination:
    Connect the 2 connectors.



11. INSPECT VEHICLE HEIGHT

  1. Inspect the vehicle height (LandCruiser RM0000038UA01EX_01_0002.html).