REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)
REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)
Rear Crankshaft Oil Seal -- Removal |
| 1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission) |
Remove the automatic transmission (LandCruiser RM0000018ZD05KX.html).
| 2. REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission) |
Remove the manual transmission (LandCruiser RM00000178S013X.html).
| 3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission) |
Using SST, hold the crankshaft.
- SST
- 09213-54015(91651-60855)
09330-00021
 |
Remove the 8 bolts, rear spacer, drive plate and front spacer.
 |
| 4. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission) |
Put matchmarks on the clutch cover and flywheel.
Text in Illustration *a Matchmark
 |
Loosen each set bolt one turn at a time until spring tension is released.
Remove the 6 set bolts and pull off the clutch cover.
- NOTICE:
- Do not drop the clutch disc.
| 5. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission) |
- NOTICE:
- Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.
| 6. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission) |
Using SST, hold the crankshaft.
- SST
- 09213-54015(91651-60855)
09330-00021
|
Remove the 8 bolts and flywheel.
- NOTICE:
- Do not reuse the bolts.
 |
| 7. REMOVE REAR CRANKSHAFT OIL SEAL |
Using a knife, cut off the lip of the oil seal.
Text in Illustration *1 Cut Position
 |
Using a screwdriver, pry out the oil seal.
- HINT:
- Tape the screwdriver tip before use.
- NOTICE:
- Do not damage the surface of the oil seal press fit hole or crankshaft.