Starter -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 2. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH |
Remove the exhaust manifold sub-assembly LH (LandCruiser RM00000456G00XX.html).
| 3. REMOVE STARTER COVER |
Remove the 3 bolts and starter cover.
 |
| 4. REMOVE STARTER ASSEMBLY |
Remove the bolt and disconnect the ground wire.
 |
Disconnect the starter connector.
Open the terminal cap.
Remove the nut and bolt, and then disconnect the starter wire.
Remove the 2 bolts and starter assembly.
 |
| 5. REMOVE FLYWHEEL HOUSING SIDE COVER |
 |