INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System)
INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System)
INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System)
INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System)
Front Door Lock -- Inspection |
| 1. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System) |
| *a | Lock | *b | Unlock |
| *c | Component without harness connected (Front Door Lock Assembly LH) | - | - |
Check the door lock motor operation.
Apply battery voltage to the motor connector and check the operation of the front door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the front door lock assembly.
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
for LHD:
Text in Illustration *a Lock *b Off *c Unlock *d Component without harness connected
(Front Door Lock Assembly LH)Check the door lock and unlock switch.
- Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) Lock Below 1 Ω 9 (L) - 7 (E)
10 (UL) - 7 (E)OFF 10 kΩ or higher 10 (UL) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
- Measure the resistance according to the value(s) in the table below.
| 2. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System) |
| *a | Lock | *b | Unlock |
| *c | Component without harness connected (Front Door Lock Assembly LH) | - | - |
Check the door lock motor operation.
Apply battery voltage to the motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 3 (UL)Lock Battery positive (+) → 3 (UL)
Battery negative (-) → 4 (L)Unlock Battery positive (+) → 2 (DL)
Battery negative (-) → 1 (UNDL)Set Battery positive (+) → 1 (UNDL)
Battery negative (-) → 2 (DL)Unset
- If the result is not as specified, replace the front door lock assembly.
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
for LHD:
Text in Illustration *a Lock *b Unlock *c Component without harness connected
(Front Door Lock Assembly LH)- - Check the door lock and unlock switch.
- Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) Lock Below 1 Ω 9 (L) - 7 (E)
10 (UL) - 7 (E)OFF 10 kΩ or higher 10 (UL) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
- Measure the resistance according to the value(s) in the table below.
| 3. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System) |
| *a | Unlock | *b | Lock |
| *c | Component without harness connected (Front Door Lock Assembly RH) | - | - |
Check the door lock motor operation.
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the front door lock assembly.
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
for RHD:
Text in Illustration *a Unlock *b Lock *c Component without harness connected
(Front Door Lock Assembly RH)- - Check the door lock and unlock switch.
- Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (L) - 8 (E) Lock Below 1 Ω 6 (L) - 8 (E)
5 (UL) - 8 (E)OFF 10 kΩ or higher 5 (UL) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
- Measure the resistance according to the value(s) in the table below.
| 4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System) |
| *a | Unlock | *b | Lock |
| *c | Component without harness connected (Front Door Lock Assembly RH) | - | - |
Check the door lock motor operation.
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 2 (L)Unlock Battery positive (+) → 4 (DL)
Battery negative (-) → 3 (UNDL)Set Battery positive (+) → 3 (UNDL)
Battery negative (-) → 4 (DL)Unset
- If the result is not as specified, replace the front door lock assembly.
Check the detection switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
for RHD:
Text in Illustration *a Unlock *b Lock *c Component without harness connected
(Front Door Lock Assembly RH)- - Check the door lock and unlock switch.
- Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (L) - 8 (E) Lock Below 1 Ω 6 (L) - 8 (E)
5 (UL) - 8 (E)OFF 10 kΩ or higher 5 (UL) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the front door lock assembly.
- Measure the resistance according to the value(s) in the table below.